Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Headsets

Cane Creek 110 Headset
$175.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty
Cane Creek 110 Series External Cup Headset
$159.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
Cane Creek Hellbender 70 Headset
$99.99 - $119.99
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets
Cane Creek Hellbender 70 Visco Lower Headset - ZS56/40-H8, Mid Tune, Black
$119.99
Building upon Cane Creek's ongoing legacy of bicycle headset innovation, the introduction of the New Hellbender 70 Visco brings new patented steering stabilizing technology to a wide variety of cycling disciplines. Designed to reduce high-frequency oscillation of the bicycle steering assembly, known as speed wobble. The Cane Creek Hellbender 70 Visco headset helps riders maintain control, reduce fatigue and ride with confidence. -Stabilized steering with Cane Creek’s Patented headset damping technology; utilizing Micro-thin plates with fluorocarbon gel in between -Includes a pre-set “mid-tune” damping, each layer; Damping effects are tunable for rider preference -7075 T6 Aluminum construction -Sealed, stainless-steel Hellbender bearings
Syncros ZS66/28.6|ZS66/46 Headset
$119.99
- Compatible with Patron MY2022 - Alloy cups - Block lock
Cane Creek Hellbender 70 Lite
$99.99 - $116.99
Hellbender 70 Lite headset.
FSA Orbit Xtreme Pro
$110.99
The FSA Orbit Xtreme Pro threadless headset is constructed of forged and CNC machined 7075/T6 aluminum cups. - Stainless steel Angular Contact Bearings - Stainless steel crown race - 1.5'' patented alignment tip for increased durability and performance - Deep Cup model has 22mm insertion of upper and lower cups
Wolf Tooth 2 Degree GeoShift Performance Angle Short Headset
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 2 Degree Adjustment - Short version is designed for headtube lengths between 90 - 115 mm
Wolf Tooth GeoShift 1 Degree Long Performance Angle Headset
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 1 Degree Adjustment - Long version is designed for headtube lengths between 115 - 140mm
Wolf Tooth GeoShift 1 Degree Short Performance Angle Headset
$104.95
The GeoShift Performance Angle Headset allows you to adjust the geometry of your bike by changing the head tube angle, available in 1 or 2 degree options. This unique design lets the bearings sit at an angle to align with the steerer tube, preventing creaking noises commonly found with angle headsets that feature a spherical design. Reduce the head tube angle to make for slacker geometry and added stability on fast descents, or increase the angle using the opposite orientation of the headset, to make for steeper geometry and quicker steering with maximum front wheel traction. - Enduro black oxide coated chromium steel bearing included on both the upper and lower - Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately) - Machined in the USA with lightweight, strong, durable aircraft-grade 6061 aluminum - Includes: Upper and lower cups, bearings, crown race, star nut, shims, stem cap with 5mm integrated spacer and bolt - 1 Degree Adjustment - Short version is designed for headtube lengths between 90 - 115 mm
Cane Creek 110 ZS44 Headset Top (Tall)
$94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. • Technical Description: ZS44/28.6/H15/K|ZS44/30/H4/x • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 15mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 • Weight: 95.62g
Syncros Headset ZS49/28.6 – EC49/30
$89.99
KEY FEATURES: - For Scott Gambler MY20 onwards BEARINGS: Sealed cartridge bearings FEATURES - Designed for Scott Gambler Downhill bike from 2020 model year onwards.
FSA Orbit Z 1.5R ZS
$88.00
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap - Weight: 89g
Cane Creek 110 EC44 Headset Bottom
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: EC44/40/H12/x • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.76mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 12mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 61.02g
Cane Creek 40 Series
$79.99 - $84.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
Cane Creek 40 ZS44/EC44 Tapered Headset
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6|EC44/40 • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.0mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.0mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum
Syncros ZS49/28.6|ZS49/30 Headset
$79.99
- Fits pre MY20 Scott Gambler and Voltage FR - 1 1/8" Press Fit - ZS49/28.6 | ZS49/30 - Alloy - Sealed cartridge - 13.9mm stack height - additional +/- 1°/2° adjustable cups
Cane Creek 40 Series Tapered
$78.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
Cane Creek 40 Series ZeroStack Conversion Headset
$74.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
Ritchey WCS Logic Threadless Headset
$74.95
The WCS Logic Threadless Headset the reliable workhorse of the Ritchey threadless headset range. This smooth and reliable specimen features lightweight, precision-machined aluminum cups, sealed cartridge 45/45-degree hybrid ceramic bearings with a titanium coating, and comes packed with Ritchey Grease and a sealed design that promises minimal penetration from the elements. - Bearing: Sealed cartridge (ACB) - Ti coated - Material: Alloy - Stack Height: 28.3mm
Syncros Headset IS42/28.6 - IS52/40
$69.99
KEY FEATURES: - Fits Scott Addict CX Addict CX MY16, 1 1/8" - 1.5" Tapered, Drop-In, IS42/28.6 | IS52/40, Alloy, sealed cartridge, 8.7mm stack height. BEARINGS: Sealed cartridge bearings FEATURES: For Scott Addict CX MY16 Bikes
Syncros Headset ZS56/28.6 -ZS56/40 eRide
$69.99
KEY FEATURES: - Fits Sub/Silence eRIDE MY22 Replacement headset for Scott Sub and Silence eRIDE suspended fork bikes MY22 onwards. BEARINGS: Sealed cartridge bearings FEATURES: - Compatible with Sub/Silence eRIDE MY22 suspended fork bikes - Alloy cups
FSA Orbit ZS
$66.00
- Bearing Type: Cartridge - Weight: 125g - Crown Race: 40 - S.H.I.S. Lower: ZS56 - S.H.I.S. Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
Wolf Tooth EC34 Premium Upper Headset
$64.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless Steel Bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Lifetime warranty
Wolf Tooth ZS44 Premium Upper Headset
$64.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty
Cane Creek 40 Series Short Cover
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
Cane Creek 40 Series Tall Cover
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Uses 36/45 degree crown race and compression ring - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
Cane Creek 40 Series ZeroStack Headset
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
Cane Creek 40 Series External Cup Headset
$62.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
Cane Creek AER Headset Upper
$60.00
The AER headset upper is a great choice for road and mountain bike applications- a high quality durable headset upper with durability and lightweight performance in mind. - Steel/Aluminum hybrid bearings
Page 1 of 4 Next page