Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Syncros Creston iC SL Bar/Stem
$599.99
The Syncros Creston iC is the ultimate in terms of integration on the road. Clean and uncluttered our new Syncros combo cockpit allows us to route all the cables completely internally through the bar, headset and into the frame as part of SCOTT’s new ICC routing. - Carbon UD, Superlight Layup - Compact Bend 75mm/125mm Reach/Drop - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/4" for Scott Addict RC MY20 - Weight: 280g
Syncros Creston iC SL X
$599.99
Designed for gravel, the Syncros Creston iC SL X is the ultimate in integration with a flare designed to give maximum options offroad. Clean and uncluttered, our Syncros combo cockpit allows us to route all the cables completely internally through the bar, through the headset, and into the frame. - Developed for the SCOTT Addict Gravel - Integrated cables for both mechanical and electronic groupsets - iC integrated cockpit - Gravel-specific geometry with super-compact drops and short reach - 60mm/115mm/16° (Reach/Drop/Flare) - Full carbon construction, Superlight layup - Weight: 315g
Syncros RR1.0 Aero Bar/Stem 440
$549.99
RR1.0 Aero are crafted from high modulus carbon fiber to ensure precise steering in a lightweight, race-worthy design. The all-in-one combo offers clean lines from the drop to the steerer clamping area. The optimized carbon layup eliminates harsh road vibrations and reduces stress hotspots. The ergonomic bend provides you comfortable hand positions to mitigate fatigue, keeping you both confident and in control. - Designed to be perfectly integrated with the new Scott Foil bike - Aero top section with compact drop and reach - Full cable and wire integration - Integrated accessory mounting threads - Stem Angle: 84 degree - Material: Carbon monocoque with forged alloy steerer
Syncros Fraser iC SL SE Bar/Stem
$399.99
A variant of our Fraser iC SL Special Edition, this version has a less extreme stem angle as preferred by Andri Frischnecht of the Scott-SRAM team. The stem has a minus 17 degree rise, 740mm width and our T-bar geometry with the weight savings and stiffness benefits that come from producing the bar and stem in one piece. This is a limited edition of the Fraser iC SL. - XC World Cup level carbon bar - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem: -17° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm - Steerer Diameter: 1-1/8" - Clamp Diameter: iC (integrated Cockpit) - Carbon UD, Superlight Layup
Syncros Fraser iC SL Special Edition Handlebar
$399.99
Ridden by the best, our Fraser edition is designed according to the preferred geometry of the World and Olympic Champion. The stem has a minus 25-degree rise and our T-bar geometry with the weight savings that come from producing the bar and stem in one piece. This is a limited edition of the Fraser iC SL. - XC World Cup level carbon bar - One piece construction - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem -25° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm
Syncros Fraser iC SL DC, 760mm
$349.99
The DC Fraser features our integrated bar and stem concept, which now also allows for the integration of cables on the front of the bike. The ultralight result is optimized here for DC or Down-Country riding with a range of stem lengths to suit every shape and size of rider. Our DC Frasers have a neutral stack height across the range of stem lengths. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Syncros Fraser iC SL Handlebar
$349.99
Our one-piece cross country handlebar/stem combo is the ultimate in lightweight for the discerning XC rider. Based on our popular T-bar flat handlebar and a -8° stem in 3 different virtual extension options our carbon engineers have been able to make a considerable weight saving with the same performance. - XC World Cup level carbon bar - One piece construction. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem -8° - Flat T-Bar shape - 9° back sweep, 6° up sweep - Width: 740mm
Syncros Fraser iC SL WC, 740mm, -20°
$349.99
The bar of choice of Kate Courtney of the SCOTT-SRAM team, the Fraser features our integrated bar and stem concept, now also allowing for the integration of cables on the front of the bike. Extensive testing allowed us to pinpoint the desired reach, drop, and sweep for Kate, allowing her to reach her optimal position to race at the highest level at the World Cup. This -20 degreee stem angle might not be for everyone but works for her. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Syncros Fraser iC SL WC, 740mm, -30°
$349.99
The bar of choice of Andri Frischknecht of the SCOTT-SRAM team, the Fraser features our integrated bar and stem concept, now also allowing for the integration of cables on the front of the bike. Extensive testing allowed us to pinpoint ideal reach, drop, and sweep for Andri, allowing him to reach his optimal position to race at the highest level at the World Cup. This -30 degreee stem angle might not be for everyone but works for him. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Syncros Fraser iC SL WC, 740mm, -40°
$349.99
The bar of choice of Nino Schurter and Lars Forster of the SCOTT-SRAM team, the Fraser features our integrated bar and stem concept, now also allowing for the integration of cables on the front of the bike. Extensive testing allowed us to pinpoint ideal reach, drop, and sweep for Nino and Lars, allowing them to get a super-low and fast position matched perfectly to what they need to race at the highest level at the World Cup. This -40 degreee stem angle might not be for everyone but works for them. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Syncros Fraser iC SL XC, 740mm
$349.99
The XC Fraser features our integrated bar and stem concept, which now also allows for the integration of cables on the front of the bike. The ultralight result is optimized here for XC racing with a range of stem lengths to suit every shape and size of rider. Our XC Frasers are sized so that the stack height remains the same on the bike no matter the stem length. A removeable stem cap hides all the cables, and a variety of mounts are available to integrate your Garmin or Wahoo computer and also to fit our lights or a GoPro camera.
Syncros Hixon iC DH 800mm Bar/Stem
$349.99
For 2020, we took our iC (integrated Cockpit) concept and applied it to downhill to produce a light, stiff, and strong one-piece cockpit for the ultimate in downhill speed. At 300g in 800mm width, it's not only one of the lightest bars available, but integrating the stem removes a huge amount of weight from the bike, while the one-piece construction allows us to reinforce key areas to inspire confidence where it is needed. Our carbon engineers worked on the layup to find the perfect balance of stiffness—not too harsh, not too soft, but just right. - Carbon UD - Up Sweep: 5° up - Back Sweep: 8° back - 15mm Rise - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: Direct Mount - Weight: 300g
Syncros Hixon iC 1.0 Rise 800mm Bar/Stem
$329.99
We took our hugely popular Hixon iC SL carbon fiber handlebar and stem combo and extended the rise from 12mm to 20mm and the width to 800mm for more aggressive trail and enduro riders. - State-of-the-art carbon bar ideal for All Mountain riding. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem - Up Sweep: 6° up - Back Sweep: 7° back - 20mm mid rise - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/8" - Weight: 270g (780mm width, 50mm virtual extension) - Width: 800mm
Syncros Hixon iC SL Handlebar 780mm
$329.99
The next evolution of our Integrated Cockpit concept, the Hixon iC is a truly revolutionary product. Thanks to a unique new construction method and high-quality carbon we have created a bar-stem combo designed for trail riding that weighs a scant 290g. - State-of-the-art carbon bar - ideal for All Mountain riding. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem - 15mm mini rise shape - 9° back sweep, 6° upsweep - Width: 780mm
ENVE Aero Road Stem
$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world. This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise. - Material: Carbon - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 42.5mm with length shim / 45.5mm with angle shim - Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm - Torque Spec, Steer Tube: 5.5Nm
ENVE Road
$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff - Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue - Titanium hardware and lightweight aluminum faceplate - 107g
Ritchey SuperLogic C-260 Carbon Stem
$299.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
Zipp SL Sprint Stem
$285.00
The SL Sprint Stem is an ideal balance of stiffness and lightweight. The stem weighs in at just 1.8g per newton meter of stiffness using SRAM's Exogram technology. Designed with feedback from top pros to meet the unrelenting demands of Grand Tour sprinters. Zipp also tapped into expertise gained from its pioneering carbon stems and exhaustively researched the marketplace to create the SL Sprint Stem. The SL Sprint comes with its own stem cap that's designed to be aerodynamically efficient by blending into the stem body. Available in six sizes, ranging from 90 to 140mm, to meet any rider's fit needs. - Updated distinctive Zipp cosmetics - Carbon Exogram construction delivers the stiffest stem on the market gram for gram. - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated computer mount available separately
ENVE M6 Stem
$280.00
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Bar Clamp Diameter (mm): 31.8 mm - Material: Carbon - S.H.I.S. Stem Clamp Diameter: 28.6 - Stem angle: 0-degree
ENVE M7 Mountain Stem 35mm
$280.00
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 35mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (35mm), 92g (50mm), 99g (65mm)
FSA OS-99 CSI Stem
$189.99
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)
Ritchey WCS Carbon Matrix C220 84D Stem
$174.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
Ritchey WCS Carbon Matrix C220 84D Stem
$174.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
Redshift Sports ShockStop Stem
$169.99
An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style
Paul Component Engineering Boxcar Stem
$141.00
The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)
Syncros Stem RR iC
$139.99
The RR 1.5 stem offers the rider or mechanic the ability to change the stem without cutting the disc brake cables while simultaneously offering a fully integrated cable setup. A removable top allows for easy access while a magnetic stem cap cover completes the minimalist look. Features: - Internal cable routing - Forged and machined AL7075 body - Hook-type face plate for integrated design - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8mm bars - 1 1/8" steerer - Includes Stem cap and bolt - Spacer kit and cap included - Weight: 240g for 110mm extension - Rise: -6°
Syntace Flatforce Stem
$119.00 - $129.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
ENVE Alloy Mountain Stem
$125.00
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications. - Blind bolt holes and shaping - Cold-forged and precision-machined - No-gap face plate and clamp area - Stainless hardware
Renthal Apex Stem
$120.95
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
Renthal Integra 35
$120.95
Renthal's revolutionary Integra 35 stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
Page 1 of 4 Next page