Brakes-Levers-Pads

Greenfield's RetroKit is used to mount Greenfield kickstands (sold separately) on bicycles that require this special piece due to cables being in the way or an unusual frame design. If you have any questions about using the RetroKit, please contact us.

- Aheadset preload adjusting bolt

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

BB30 Spacer - 15.46mm

KS Dropper Post Service Parts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

Flat head screws from Wheels Manufacturing.

Campagnolo Miscellaneous Rear Derailleur Parts, Derailleur Bolt Bushing

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Hope Brake Lever Parts

Complete remotes and remote components for KS dropper posts.

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Disc Brake Adapters

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

KS Dropper Post Service Parts

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

Replacement small parts for Hope disc brake Hope disc brake calipers.

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

Saddle clamp heads and lowers for KS Dropper posts.

KS Dropper Post Service Parts

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spacer - Alloy, 10.7, EXP

Travel Adjustment Spacers for the Resolve dropper post. The travel height of the dropper post can be reduced in 5 mm increments up to 50 mm height reduction with 10 spacers.

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert - X-Firm

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

Single sided, bottom bracket mounted cable guide, with integrated cable housing stop. - Intended to fit 40mm diameter bottom bracket shells - Includes M5 mounting bolt - Direct replacement for: Salsa Vaya, Salsa Warbird (Alloy), Salsa Journeyman, All-City Cosmic Stallion, - All-City Gorilla Monsoon, All-City Macho King, All-City Space Horse Disc

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm

FSA Mega Exo Small Parts.

RockShox 35mm Seal Kit